Great Plains ADC2220 Predelivery Manual - Manual (Page 15)

3/3/2006 167-088Q-RUS
13 Cart Assembly
23435
23446
Figure 13
Attach Standard Hub to Spindle Tube
23444
Refer to Figure 13
14. Insert standard hub assembly into spindle tube align-
ing hole in hub assembly with hole in spindle tube.
15. Secure standard hub assembly to spindle tube with
bolt removed in step 1 on previous page.
Figure 14
Remove Bolt from Spindle Tube
Figure 15
Attach Drive Hub to Spindle Tube
Refer to Figure 14
16. On opposite side of air drill cart frame, remove bolt
in spindle tube.
Refer to Figure 15
17. Insert drive hub assembly into spindle tube aligning
hole in hub assembly with hole in spindle tube.
18. Secure drive hub assembly to spindle tube with bolt
removed in step 4 above.