Great Plains ADC2220 Predelivery Manual - Manual (Page 39)

3/3/2006 167-088Q-RUS
37 Implement Assembly
Refer to Figure 79
2. Once rockshaft is aligned with frame, insert
pins through frame and rockshaft.
3. Secure pins with pin rolls.
Figure 79
Secure Rockshaft to Frame
24123
Rockshaft Gauge Wheel Tires
Refer to Figure 81
1. Remove wheel nuts from gauge wheel hub
assembly.
2. Attach gauge wheel tire to gauge wheel hub.
3. Secure tire to hub with previously removed
wheel nuts.
4. Repeat process on second tire on gauge
wheel.
5. Complete steps 1-4 to install guage wheels
on opposite side of rockshaft.
Refer to Figure 80
4. Attach hydraulic cylinder to rockshaft.
5. Secure cylinder to rockshaft with pin. Slide
washer over pin and secure with cotter pin.
6. Complete steps 4 and 5 to attach remaining
hydraulic cylinders to rockshaft.
24124
Figure 80
Attach Hydraulic Cylinder to Rockshaft
24141
Figure 81
Attach Gauge Wheel Tires to Rockshaft