Great Plains ADC2220 Predelivery Manual - Manual (Page 32)

167-088Q-RUS 3/3/2006
ADC2220 & NTA 3510 30
24106
24105
24104
Refer to Figure 60
NOTE: Hydraulic cylinders need to be secured to
frame before removing frame from rack. Secure
cylinders with bungee strap or tie-down strap.
Refer to Figure 61
4. Remove both wing pivot pin weldments from
frame. Pins are located in frame at top of
rack. NOTE: Keep pins and hardware for re-
use.
Refer to Figure 62
5. Attach lift straps to center section frame.
!
CAUTION!
Obey all safety instructions from lifting equipment
manufacturer. Be sure lift straps are securely attached
prior to lifting. Be sure lifting equipment has enough
capacity to lift implement.
6. Completely remove u-bolts securing frame to
rack.
7. Using forklift or other implement, carefully lift
center section frame from rack.
Figure 60
Secure Hydraulic Cylinders to Frame
Figure 61
Remove Pivot Pin from Frame
Figure 62
Attach Lift Straps and Lift Frame from Rack