Great Plains ADC2220 Predelivery Manual - Manual (Page 50)

167-088Q-RUS 3/3/2006
ADC2220 & NTA 3510 48
24173
Air Drill Cart
Frame
NTA3510
Frame
Cart Hook-Up
Refer to Figure 111
1. Attach one cart link weldment (5) to NTA3510
frame. Use cart link pin (1) and pin roll (2) to se-
cure.
2. Attach the other cart link weldment (5) to
NTA3510 frame. Use cart link pin (1) and pin roll
(2) to secure.
To attach ADC2220 to NTA3510:
1. Attach center of cart to cart link weldment (5) us-
ing bushing spindles (3), center cart link pin (4),
and pin roll (2).
2. Attach each end of cart to cart link weldment (5)
using bushing spindles (3), cart link pin (1), and
pin roll (2).
Figure 111
Cart Hook-Up