Great Plains YP Fertilizer System - Manual (Page 9)

Great Plains Mfg., Inc.
Installation Instructions 9
02/29/2008 407-197M
Install Right Tank Hose
Refer to Figure 16
41. Select:
42. Select the coil of:
43. From the adaptor at the right tank fitting assem-
bly tee, route the hose through the right bracket/
clamp ( , ) to the adaptor at the right end
of the inter-tank fitting assembly.
44. Slide the end of the hose, and a clamp onto the
right end adaptor of the inter-tank fitting assem-
bly. Secure clamp.
45. Leaving some slack in the hose, cut it to length back
at the right tank tee. Place a clamp over the
hose end and secure to the tank tee.
46. Tighten the nuts on the right bracket/clamp ( ,
).
Install Quick-Fill Hose
47. Select:
48. Select the coil of:
Refer to Figure 17
49. From the (front) hose-barb adaptor end of the quick-
fill fitting assembly, route the hose to the left tee of
the inter-tank fitting assembly.
50. Slide the end of the hose, and a clamp onto the
left tee of the inter-tank fitting assembly. Secure
with clamp.
51. Leaving some slack in the hose, cut it to length back
at the quick-fill inlet. Place a clamp over the
hose end and secure to the inlet.
Deferred Tank Items
The tank kit includes hose used at the pump. It is deferred
until after pump installation, under the topic “Install
Pump-Strainer Hose” on page 12.
The supply hose from the inter-tank fittings to the mani-
fold(s) is not yet installed. It is deferred until after pump
installation, under the topic “Install Supply Line from
Tanks” on page 12.
Qty Call Part Description
2 800-125C CLAMP WRM DRV#28 SS(1.31-2.25)
Qty Call Part Description
- 990-181R HOSE 1 1/2 ID 150PSI EPDM
Qty Call Part Description
2 800-125C CLAMP WRM DRV#28 SS(1.31-2.25)
Qty Call Part Description
- 990-181R HOSE 1 1/2 ID 150PSI EPDM
U
D
F
B
L
R
Figure 16
Right Inter-Tank Hose
22821
151
122
138
148
120
122
151
138
151
120 148 148
122
138
122
120
148
Figure 17
Quick-Fill Hose
27092
122
151
122
122
151
122
138
122