Great Plains YP Fertilizer System - Manual (Page 8)

Great Plains Mfg., Inc.
8 Fertilizer System
407-197M 02/29/2008
Refer to Figure 14
35. Position the mount plate
with valve assembly
under the rear tool bar directly aft of the intercon-
nect tee assembly. Orient so that the quick-discon-
nect plug end
of the assembly faces to the rear.
Place the clamp plate on the tool bar top and
secure with
1 ⁄
2
in nuts .
Install Inter-Tank Hoses
These hoses are cut-to-length from a coil supplied.
Excess material is supplied, so there will be some hose
left over.
Install Left Tank Hose
Refer to Figure 15
36. Select:
37. Select the coil of:
38. From the adaptor at the tee on the left tank bot-
tom fittings assembly, route the hose to the
adaptor at the left end of the inter-tank fitting
assembly. Route clear of planter moving parts.
39. Slide the end of the hose, and a clamp onto the
left end adaptor of the inter-tank fitting assem-
bly. Secure clamp.
40. Leaving some slack in the hose, cut it to length back
at the left tank tee. Place a clamp over the hose
end and secure to the tank tee.
Qty Call Part Description
2 800-125C CLAMP WRM DRV#28 SS(1.31-2.25)
Qty Call Part Description
- 990-181R HOSE 1 1/2 ID 150PSI EPDM
Figure 14
Quick-Fill Mount Point
27091
1 118
103
127
140
103
1
140
118
127
U
D
F
B
L
R
Figure 15
Left Inter-Tank Hose
22821
151
138
148
122
122
122
151
138
151
148
122
148
122