Great Plains YP Fertilizer System - Manual (Page 26)

Great Plains Mfg., Inc.
26 Fertilizer System
407-197M 02/29/2008
Install Starter Drop Lines
If your planter has fewer than 32 row units, some posi-
tions get caps instead of drop lines.
142. Raise the planter and install transport locks.
143. Lower the row units.
144. Select:
145. If not already installed on the nozzles, select:
Not all of the caps may be used.
Refer to Figure 48.
146. If the nozzle has no associated row unit, install a cap
.
147. At each nozzle connected to a row, route the hose
from the nozzle down to the row unit applicator (typi-
cally a tube on a seed firmer).
148. Connect the hose end to the tube (not shown),
using a push-lok adaptor .
149. Use a cable tie (not shown) to secure the hose
as needed to the applicator structure. Allow slack for
row unit motion.
150. Allowing a small amount of slack, cut the hose to
length at the boom nozzle. The Figure notwithstand-
ing, do not loop the line or allow it to sag.
151. Connect the hose end to the nozzle with an
adaptor .
Qty Call Part Description
- 990-109R TUBE NYLON 1/4OD X 062WL
16 832-042C NOZZLE SHUT OFF CAP W/ GASKET
32 830-383C CP 1/4 PUSH LOK POLY
32 800-303C CABLE TIE 2 DIA MIN - BLK
Qty Call Part Description
32 800-367C AD PUSH 1/4TUBEX1/4MNPT
Figure 48
Starter Drop Line
22820
165
196
1
186
196
187
186
164
165
186
196
186
164
196
165