Great Plains YP Fertilizer System - Manual (Page 7)

Great Plains Mfg., Inc.
Installation Instructions 7
02/29/2008 407-197M
Refer to Figure 11
31. Select the inter-tank double-tee fitting assembly, con-
sisting of:
Refer to Figure 12 and Figure 11
32. Mount the inter-tank assembly on the left bracket
. Orient the tee assembly so that the left tee
faces to planter rear, and the right tee faces forward.
Use the removed clamp
around the center adap-
tor or inside end of the right tee.
Install Quick-Fill Inlet
Refer to Figure 13
33. Select the quick-fill inlet assembly, consisting of:
34. Partially disassemble the mounting hardware by
removing the four
1 ⁄
2
in nuts and the mount
clamp plate . Do not remove the bolts securing
the valve body to the mount.
Qty Call Part Description
1 830-045C AD 1 1/2MNPT POLYPROP
2 830-031C TEE 1 1/2FNPT POLYPROP
4 830-094C AD 1 1/2MNPT X 1 1/2HB POLYP
U
D
F
B
L
R
Figure 11
Tank Interconnect Assembly
27105
136
135
138
138
138
138
135
136
135
138
Figure 12
Tank Interconnect Mounted
27092
148
120 120
148
136
Qty Call Part Description
1 148-410D VALVE MOUNT PLATE
1 411-273D VALVE MNT CLAMP PLT
1 502-060D DUST PLUG CHAIN 10
4 802-047C HHCS 1/2-13X6 GR5
4 803-147C NUT HEX NYLOCK 1/2-13
4 804-016C WASHER FLAT 1/2 SAE PLT
1 805-010C PIN HAIR COTTER .094
1 829-048C VALVE - 1 1/2FNPT X 2FCL POLYP
1 830-094C AD 1 1/2MNPT X 1 1/2HB POLYP
1 830-186C PL 2MCL POLY-GLASS
U
D
F
B
L
R
Figure 13
Quick-Fill Inlet Assembly
22821
103 118
127
119
130
140
138
132
129
124
103
118
119
124
127
129
130
132
138
140
127
118