Great Plains 3S-4010HDF Operator Manual - Manual (Page 28)

24 3S-4010HD and 3S-4010HDF Great Plains Manufacturing, Inc.
196-522M 03/28/2012 E
Pre-Transport Checklist
Before transporting the drill, check and observe the fol-
lowing items.
❑ Make sure the weight of the tractor equals or
exceeds 67% the drill.
❑ Marker Checklist Complete
Markers must be folded in transport carriers.
❑ Drill Folded and Locked
❑ Tires
Check that all tires are properly inflated as listed on
“Tire Inflation Chart” on page 89.
❑ Lock-Out Hubs
Disengage rockshaft wheels from drive system.
See “Lock-Out Hubs” on page 22.
❑ Bystanders
Check that no one is in the way before moving. Do
not allow any one to ride on the drill.
❑ Warning Lights
Always use tractor and drill warning lights when
transporting the drill.
❑ Clearance
Know the maximum dimensions of the drill in trans-
port position and follow a route that provides ade-
quate clearance from all obstructions, including
overhead lines.
See “Specifications and Capacities” on page 89.
❑ Stopping Distance
Allow sufficient stopping distance and reduce speed
prior to any turns or maneuvers. If transported full,
allow extra stopping distance.
❑ Road Rules
Comply with all national, regional and local laws
when transporting on public roads.
❑ Watch Traffic
The seed boxes obstruct a portion of your rear view.
Be prepared for sudden maneuvers from following
vehicles.
FigureSpacer:
Figure 23
Marker in Transport Cradle
29092