Great Plains 3S-4010HDF Operator Manual - Manual (Page 114)

110 3S-4010HD and 3S-4010HDF Great Plains Manufacturing, Inc.
196-522M 03/28/2012 E
Small Seeds Partition Installation
If partitions (page 87) were ordered with the drill, they
are not factory-installed. The order quantity varies with
the seed type and planting terrain.
Refer to Figure 109
Start at the left side of the left Small Seeds box.
1. Loosen, but do not remove, the:
802-148C HFSS 1/4-20X1/2 GR5
and
803-006C NUT HEX 1/4-20 PLT
at a seed meter .
2. Select one:
123-409D RMVBL SMALL SEED BOX PARTITION
3. Insert the partition under the bolt heads from
the right. Slide it fully to the left. Re-tighten nuts and
bolts (use Grade 2 torque).
FigureSpacer:
Figure 109
Small Seeds Partition
29094
1
U
D
L
R
B
F
31
31
32
32
30
31
32
1
30
30 31