Great Plains 3S-4010HDF Operator Manual - Manual (Page 111)

Great Plains Manufacturing, Inc. Appendix B - Initial Setup 107
03/28/2012 196-522M
Install Weight Brackets
One to three pairs of weight brackets (page 84) are
optional, and are not factory-installed. A third pair is
optional, and is not factory-installed. Install brackets after
installing markers (if any). Weights are not included.
Install First (Outer) Bracket Pair
Start with the left wing.
Refer to Figure 106
1.
Select two:
806-172C U-BOLT 3/4-10 X 10 1/32X11 1/2
From the front of the wing, insert the U-Bolts
through the holes in the outside lug
.
2. Select one:
196-291H 40P WEIGHT BRACKET WLDMNT
and four sets:
804-023C WASHER LOCK SPRING 3/4 PLT
803-027C HEX 3/4-10 PLT
Mount the bracket weldment on the U-Bolts ,
and secure with lock washers and nuts .
3. Select one:
197-062D WEIGHT BRACKET ADJ LEG
and two sets:
802-057C HHCS 5/8-11X2 1/4 GR5
804-019C WASHER FLAT 5/8 USS PLT
804-022C WASHER LOCK SPRING 5/8 PLT
803-021C NUT HEX 5/8-11 PLT
Orient the adjustment leg toward the outside (end
of wing), and secure with bolts , flat washers ,
lock washers and nuts .
4. Repeat step 1 through step 3 for the right wing.
27068
29
29
1
FigureSpacer:
Figure 106
Weight Bracket, Outer
20323
1
U
D
L
R
B
F
21
26
27
24
29
22
28
25
23
21
28
25
21 29
28 25
22
23
26
27
24
22
23 26
27 24