Great Plains 3S-4010HDF Operator Manual - Manual (Page 10)

6 3S-4010HD and 3S-4010HDF Great Plains Manufacturing, Inc.
196-522M 03/28/2012 E
Safety Reflectors and Decals
Your drill comes equipped with all lights, safety reflectors
and decals in place. They were designed to help you
safely operate your drill.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
3. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
FigureSpacer:
Red Reflectors
838-266C
rear face of rear casters;
2 total
FigureSpacer:
Amber Reflectors
838-265C
outside face of rear casters,
rear face, inside ends, wing walkboards,
rear face, outside ends, wing walkboards,
outside face of wing walkboards;
8 total
FigureSpacer:
29122
FigureSpacer:
29122