ClearOne Interact Serial Command Guide - Manual (Page 59)

Page 54 of 56
ZRING – Ring Indication USB
This command indicates a ringing line. This command is reportable only. It cannot be queried or set.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Value Unsigned Integer 2
0 = Ring cycle has stopped
1 = Ring cycle has begun
TEXT FORM DETAILS
COMMAND FORM:DEVICE ZRING
ZTE – Telco Enable USB
This command selects/reports the hook status.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Value Unsigned Integer 2
0 = Off
1 = On
2 = Toggle
(Null to query in text)
TEXT FORM DETAILS
COMMAND FORM:DEVICE ZTE [Value]
Error Messages
The following lists possible error messages with their explanation:
Error
#
Text Message Explanation / Possible Solution
1 Memory error The box is out of internal memory. Power cycle the box.
2
No command
found
A command was not found in the string.
3
Unknown
command
response
A command was executed on a different device type that this box cannot
display. The command dictionary needs to be updated.
4
Not
implemented
The command is not implemented.
5 Argument error The command had an argument that was out of range.
6
Unknown
command
The command is not know to the box.
7 Bad Checksum The binary command’s checksum was wrong.
8
Camera Not
Responding
The camera is not responding to the commands sent.
11
Command Too
Big
The binary command is too large.