ClearOne Interact Serial Command Guide - Manual (Page 45)

Page 40 of 56
PODUPDATE – POD/BOB Status Update
This command reports the status of the POD / BOB’s for the unit. This command is read only!!!
ARGUMENT DETAILS
Name Type Size Values
Type 1 Unsigned Integer 1
0 = Microphone POD / BOB not present
1 = Microphone POD present
2 = Microphone BOB present
3 = Interact EX present
(Null to query in text)
Type 2 Unsigned Integer 1
0 = Microphone POD / BOB not present
1 = Microphone POD present
2 = Microphone BOB present
Type 3 Unsigned Integer 1
0 = Microphone POD / BOB not present
1 = Microphone POD present
2 = Microphone BOB present
USB Unsigned Integer 1
0 = USB / Headset BOB not present
1 = USB / Headset BOB present
TEXT FORM DETAILS
COMMAND FORM:DEVICE PODUPDATE [Type 1 Type 2 Type 3 USB]
PODVER – POD Version
This command reports the version of the FPGA code in the Break Out Box. This command is read only.
ARGUMENT DETAILS
Name Type Size Values
Pod Unsigned Integer 4
1 – 3 for Microphone BOBs
4 for USB/Headset
Value String 12 (Sent with a Null in text)
TEXT FORM DETAILS
COMMAND FORM:DEVICE PODVER Pod [Value]
PP – Phantom Power
This command selects/reports the status of the phantom power for a microphone.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Group Group 1 3 (M)
Value Unsigned Integer 2
0 = Off
1 = On
2 = Toggle
(Null to query in text)
TEXT FORM DETAILS
COMMAND FORM:DEVICE PP [Value]