ClearOne Interact Serial Command Guide - Manual (Page 35)

Page 30 of 56
GREPORT – Gate Report
This command selects/reports the mode of gate status reporting.
ARGUMENT DETAILS
Name Type Size Values
Value Unsigned Integer 4
0 = Off
1 = On
2 = Toggle
(Null to query in text)
TEXT FORM DETAILS
COMMAND FORM:DEVICE GREPORT [Value]
HCONF – Headset Configuration
This command selects/reports the headset configuration for the unit.
ARGUMENT DETAILS
Name Type Size Values
Pin Out
Unsigned
Integer
2
Value Pin 1
Pin
2
Pin
3
Pin 4
Supported
Headsets
0 3 V Spkr Gnd Mic Avaya 4610
1 Spkr+ Mic Gnd Spkr- Cisco 7940
2 Mic Spkr Spkr Mic
NEC DT300,
DT700 Series
(Null to query in text)
Speaker (RX)
Gain
Signed
Integer
1 9, 6, 3, 0, -3,-6, -9, or -12 dB
Microphone (TX)
Gain
Signed
Integer
1 9, 6, 3, 0, -3,-6, -9, or -12 dB
TEXT FORM DETAILS
COMMAND FORM:DEVICE HCONF [Pin Out Speaker Gain Mic Gain]
HOOK – Hook Flash
This command sends a hook flash. There is no query for this command.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Group Group 1 17 (R)
Reserved 2 0
TEXT FORM DETAILS
COMMAND FORM:DEVICE HOOK