ClearOne Interact Serial Command Guide - Manual (Page 49)

Page 44 of 56
RESETUSB – Reset USB
This command resets the USB interface on the COM module and causes the USB to re-enumerate.
ARGUMENT DETAILS
Name Type Size Values
Rsvd Unsigned Short 4 -
TEXT FORM DETAILS
COMMAND FORM:DEVICE RESETUSB [Value]
RFVER – RF Version
This command reports the version of the microcontroller code for the RF in the USB/Headset Break Out Box.
This command is read only.
ARGUMENT DETAILS
Name Type Size Values
Value String 12 (Sent with a Null in text)
TEXT FORM DETAILS
COMMAND FORM:DEVICE RFVER [Value]
RING – Ring Indication
This command indicates a ringing line. This command is reportable only. It cannot be queried or set.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Group Group 1 17 (R)
Value Unsigned Integer 2
0 = Ring cycle has stopped
1 = Ring cycle has begun
TEXT FORM DETAILS
COMMAND FORM:DEVICE RING
RINGEREN – Ringer Enable
This command selects/reports the status of the audible ring indication.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Group Group 1 17 (R)
Value Unsigned Integer 2
0 = Off
1 = On
2 = Toggle
(Null to query in text)
TEXT FORM DETAILS
COMMAND FORM:DEVICE RINGEREN