ClearOne Interact Serial Command Guide - Manual (Page 18)

Page 13 of 56
CAMMOVE – Move the Camera
This command sends commands to move the camera on the camera control port. There is no query for this
command.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Group Group 1 19 (V)
Value Unsigned Integer 2
0 = Stop
1 = Pan Right
2 = Pan Left
3 = Tilt Up
4 = Tilt Down
5 = Zoom In
6 = Zoom Out
TEXT FORM DETAILS
COMMAND FORM:DEVICE CAMMOVE [Value]
CAMPOSITION – Camera Position
This command sets or reports the current position of the camera on the camera control port.
ARGUMENT DETAILS
Name Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 19 (V)
Pan Angle Signed Float 2
If Sony, -100 to 100.
If Canon, -100 to 100.
(NULL to Query in Text)
Degrees
Tilt Angle Signed Float 4
If Sony, -25 to 25.
If Canon, -30 to 30.
Degrees
TEXT FORM DETAILS
COMMAND FORM:DEVICE CAMPOSITON [Pan Tilt]
CAMPRESET – Camera Preset
Executes a camera preset. There is no query for this command.
ARGUMENT DETAILS
Name Type Size Values
Value Unsigned Integer 4 1 – 10
TEXT FORM DETAILS
COMMAND FORM:DEVICE CAMPRESET [Value]