ClearOne Interact Serial Command Guide - Manual (Page 50)

Page 45 of 56
RINGERIGN – Ringer Ignore
This command causes the ring tone to be suppressed and the generation of the RING command until the
current incoming call is disconnected. There is no query for this command.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Group Group 1 3 (R)
Reserved - 2
TEXT FORM DETAILS
COMMAND FORM:DEVICE RINGERIGN
RINGERLVL – Audible Ring Level
This command selects/reports the audible ring’s level.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Group Group 1 17 (R)
Value Signed Float 2
-12.00 – 4.00 dB
(Null to query in text)
TEXT FORM DETAILS
COMMAND FORM:DEVICE RINGERLVL [Value]
RINGERSEL – Audible Ring Melody Selection
This command sends/reports the audible ring melody.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Group Group 1 17 (R)
Value Unsigned Integer 2
1 – 3 (Null to query in text)
TEXT FORM DETAILS
COMMAND FORM:DEVICE RINGERSEL [Value]
RINGERTEST – Audible Ring Melody Test
This command plays the current audible ringer melody. This command is executable only. There is no query.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Group Group 1 17 (R)
Reserved Unsigned Integer 2 0
TEXT FORM DETAILS
COMMAND FORM:DEVICE RINGERTEST