ClearOne Interact Serial Command Guide - Manual (Page 30)

Page 25 of 56
EQSEL – Equalization Enable
COMMAND FORM:DEVICE FPGAVER [Value]
This command enables / disables or reports the current status of the equalization on the input or output.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Group Group 1 2, 7 (O, L)
Value Unsigned Integer 2
0 = Off
1 = On
2 = Toggle
(NULL to query in text)
TEXT FORM DETAILS
COMMAND FORM:DEVICE EQSEL [Value]
ERROR – Error Notification
This reports back an error that occurred with a command. This cannot be sent or queried.
ARGUMENT DETAILS
Name Type Size Values
Original ID
Unsigned
Integer
2
The command ID of the command sent that generated the
error.
Original
Mode
Unsigned
Integer
2
The original mode the command sent was in.
1 = ASCII
2 = BINARY
Error Code
Unsigned
Integer
4 ErrorMessages
TEXT FORM DETAILS
COMMAND FORM:DEVICE ERROR
FILSEL – Filter Selection
This command selects/reports the on/off state of a filter for a microphone.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Group Group 1 3 (M)
Node Unsigned Integer 1
1 – 3 for Group 3 (M)
1 – 4 for Group 5 (P)
(* for all in text, 0xff for all in binary)
Value Unsigned Integer 1
0 = Off
1 = On
2 = Toggle
(Null to query in text)
TEXT FORM DETAILS
COMMAND FORM:DEVICE FILSEL [Value]