ClearOne Interact Serial Command Guide - Manual (Page 58)

Page 53 of 56
VOLBUT – Volume Button
This command sets or reports the channel assigned to the volume button or command.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 2
See GroupAndChannels
(Null to query in text)
Group Group 2 2, 5 (O, P)
TEXT FORM DETAILS
COMMAND FORM:DEVICE VOLBUT [Channel Group]
VOLUME – Volume Adjustment
This command changes or reports back the gain for the output channel set as the EC reference.
ARGUMENT DETAILS
Name Type Size Values
Value Signed Float 4
-99.90 – 99.90 dB **
(Null to query in text)
Absol / Rel 0
A = Absolute
R = Relative
Null = Relative
TEXT FORM DETAILS
COMMAND FORM:DEVICE VOLUME [Value] [Absol/Rel]
** Note: Values indicate entry range only. Actual internal range of the gain stage is from –14.00 to 18.00 dB
for the Interact AT and -65.00 to 20.00 dB for the Interact PRO. Absolute values will be limited to the internal
gain range.
ZDIAL – DTMF Dialing USB
This command dials a DTMF sequence or reports back the last sequence dialed.
ARGUMENT DETAILS
Name Type Size Values
Channel Channel 1 See GroupAndChannels
Reserved 2 0
Number String 44
1 – 44 Chars of ‘0’ – ‘9’, ‘A’ – ‘D’, ‘*’, ‘#’, ‘,’
(Null to query last number dialed in text)
TEXT FORM DETAILS
COMMAND FORM:DEVICE ZDIAL [Number]