SARGENT Profile Series v.G1.5 Exit Devices - Manual (Page 5)

3
For installation assistance, contact SARGENT at 800-810-WIRE (9473)
Door Name 5666
Seq User Trans
0 001 —
1 003 —
2 003 —
3 020 —
4 003 —
Transaction
number Transaction
type User
number
Door
name
To Program Door Name into Keypad
99# Master Code* Yellow LED blinks
43# Door Name (up to 5 digits)# Yellow LED blinks
0# Yellow LED blinks quickly
* Yellow LED blinks slowly (If solid, see note)
* Yellow LED goes out
To Interrogate Transaction Log
99# Supervisory or Master Code* Yellow LED blinks
70# 0# 0# Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED goes out (If solid, see note)
When done printing, the green LED will turn off
and the yellow LED will blink slowly.
*
Yellow LED goes out
To Reset/Clear Transaction Log
99# Master Code* Yellow LED blinks
76# 00000# 00000# Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks slowly
* Yellow LED goes out (If solid, see note)
To Delete A User
99# Master Code* Yellow LED blinks
50# 1# (User Number 04-100)# Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks slowly (If solid, see note)
* Yellow LED goes out
To Enable/Disable A User
99# Master Code* Yellow LED blinks
56# 0# (Enable) or 1# (Disable)
(User No. 04-100)#
Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks slowly (If solid, see note)
* Yellow LED goes out
Varies
Keypad Programming Instructions for the Profile Series LK Lock
Hold an infrared printer up to the infrared
LED (as shown). An HP82240B Infrared
Printer can be used to download information
from the keypad to a printout. For additional information, see “Transaction Log”.
To LED
location
Infrared
printer
(52-2069)
Note: Seq. # 0 is the
programming request
to output the entries.
Sequence numbers
1-9 are the actual
entries.
© SARGENT Manufacturing Company