tekmar 553 Thermostat Installation User Manual
Page 22
© 2014
553_D - 09/14
22 of 52
A Watts Water Technologies Company
Setting
Display
SENSOR 2
The temperature measurement from the sensor 2
input wiring terminals.
Access Level: Installer
Range: -58 to 212°F
(-50.0 to 100.0°C)
Conditions: Sensor 2 is set to ROOM, FLOR, or OUT. Default: Not applicable.
HUMIDITY LOCAL
The built-in relative humidity sensor measurement.
Access Level: Installer
Range: 0 to 100%
Conditions: Humidity Sensor is set to On.
Default: Not applicable.
OUTDOOR HIGH
The highest recorded outdoor air temperature
measurement. Touch the number and the ENTER
key to reset.
Access Level: Installer, User
Range: -76 to 149°F
(-60.0 to 65.0°C)
Conditions: An outdoor temperature is available.
Default: Not applicable.
OUTDOOR LOW
The lowest recorded outdoor air temperature
measurement. Touch the number and the ENTER
key to reset.
Access Level: Installer, User
Range: -76 to 149°F
(-60.0 to 65.0°C)
Conditions: An outdoor temperature is available.
Default: Not applicable.
ROOM HIGH
The highest recorded room temperature measurement.
Touch the number and the ENTER key to reset.
Access Level: Installer, User
Range: -76 to 149°F
(-60.0 to 65.0°C)
Conditions: Room Sensor is set to ON or Sensor 1
or 2 is set to ROOM.
Default: Not applicable.
ROOM LOW
The lowest recorded room temperature measurement.
Touch the number and the ENTER key to reset.
Access Level: Installer, User
Range: -76 to 149°F
(-60.0 to 65.0°C)
Conditions: Room Sensor is set to ON or Sensor 1
or 2 is set to ROOM.
Default: Not applicable.
Monitor Menu (2 of 4)