Photoflex AC-DUALSMKT DualFlash Adapter Kit - Manual (Page 5)

5
AC-DUALSM
For warranty registration and information, please visit www.photoflex.com
2. connecting the stud
receiver to the reflector
connector
The stud receiver has a 3/8” threaded shaft that will fit any of
the large tapped holes on the circumference of the reflector
connector (Item SC-B9108DSM) sold separately. Hand tight-
en together securely. [Fig 12] {Fig 13]
3. soft box assembly with the
reflector connector
Following the standard assembly procedure as detailed in the
instructions included with your softbox; insert the flexible steel
rods of the softbox into the receiver holes on the outside cir-
cumference of the reflector connector. Insert one rod then the
next one diagonally across from it and so on. [Fig 14]
Figure 11. Figure 13.
Figure 14.
Figure 12.