Photoflex AC-LRCAMADPT LiteReach Camera Adapter - Manual

visit photoflex lightingschool .com® for the best free learning resource! For detailed specifications, product tutorial videos and more, please visit www.photoflex.com®
PROFESSIONAL PHOTOGEAR
LiteReach Camera Adapter Manual • Item#: AC-LRCAMADPT
Rev 06/28/13
LiteReach Camera Adapter
Connecting the LiteReach Camera Adapter
1. The LiteReach Plus Camera adapter is an accessory which
will allow you to easily attach small cameras or any small
items that have a ¼-20 tapped mount, to the stud of the
LiteReach Plus, LiteReach or any standard 5/8” top
Litestand. Figure 1
2. The adapter will attach to small still or video cameras to act
as a mono pod for location shooting. Figure 2
3. The ¼ threaded post is made of steel for a secure fit to
your camera. Make sure that the adapter is tightened
securely to your camera. Figure 3
4. With the adapter securely attached to your camera you
can now place the assembly on top of any 5/8 inch stud
such as on the LiteReach, LiteReach Plus or a Photoflex
LiteStand. Figure 4
5. The stud of a LiteReach or of any Photoflex LiteStand will
insert into the receiver of the LiteReach Camera Adapter.
Figure 5
6. The set screw on the LiteReach Camera Adapter must be
retracted to allow the top stud of your LiteStand or Lite-
Reach to be fully inserted into the receiver.
Note: The stud on the LiteReach Plus has a flat side to
prevent rotation of items placed on it. Be sure that the
set screw of the LiteReach Camera Adapter is tight-
ened against this flat side. Figure 6
7. Once the stud is fully seated into the receiver, tighten the
set screw to prevent accidental detachment of the camera.
Your completed set up should feel secure. Figure 7
8. The LiteReach Plus Adapter is a handy fitting for a variety
of applications. See Figures 8 and 9 for a few examples.
Figure 2 Figure 1
Figure 3 Figure 4
Figure 6 Figure 5
Figure 7 Figure 8
Figure 9
5 YEAR PHOTOFLEX ® WARRANTY
• The LiteReach Camera Adapter has a 5 year warranty that covers
manufacturer’s defects and workmanship
• We reserve the right to inspect all merchandise returned (end users
and dealers) for warranty fulfillment.
• All returns must be accompanied by a receipt showing date of
purchase.
• Freight must be paid by the customer or dealer.
• Warranties are valid only from date of Original Purchase.
Customer Support (800) 486-2674
email: [email protected]
Corporate Office (831) 786-1370 • FAX (831) 786-1372
97 Hangar Way, Watsonville, CA 95076
©2013 Photoflex, Inc. ALL RIGHTS RESERVED. LiteReach ® , LiteStand ® , Photoflex ® and the Photoflex
logo are trademarks or registered trademarks of Photoflex and/or its affiliates in the U.S. and other
countries.
®
®