Photoflex DP-FSBGSPKT FirstStudio BackDrop Support Kit - Manual

Visit photoflex lightingschool .com® for the best free learning resource! For detailed specifications, product tutorial videos and more, please visit www.photoflex ® .com
PROFESSIONAL PHOTOGEAR
Figure 1. Leg
braces should be
parallel to floor
Figure 3a. LiteStand will not
collapse if collar tightened
above bottom of the center
LiteStand riser.
Figure 2
Figure 4.
FirstStudio BackDrop Support Kit
Contains:
1. 2 x LiteStand Medium DP-LS933
2. 1 x BackDrop Pole DP-412
3. 1 x Carry Bag DP-SHDBSSBAG
Instructions for Set Up
For use with a backdrop designed to slide over the pole, like a
muslin or paper roll.*
1. Extend pole to the length desired (note that it does not lock
in place at any length).
2. Slide the backdrop over the pole or push pole through the
core of the backdrop sleeve. One of the T-knobs at the
ends of the pole may need to be removed temporarily to
allow the pole to fit in the sleeve of your backdrop.**
3. The pole should extend a few inches on each side of the
backdrop.
4. Open each LiteStand base such that the braces are parallel
to the floor. Figure 1
5. The center column of the LiteStand has a T-knob at the
very bottom of the pole where these braces connect.
For normal use with a muslin or drape style backdrop, this
is best left tightened at the very bottom of the pole so it
does not touch the ground. Figure 2
For use with heavy paper rolls, this center column can
be adjusted to rest on the floor for added stability.
Note: If the center column is tightened while resting on
the floor, the LiteStand will not be able to collapse when
packed. It is necessary to loosen the bottom T-knob and
slide the brace collar all the way to the bottom at floor
level in order to successfully collapse the LiteStand legs.
Figure 3 and 3a
6. Attach BackDrop Pole to the top of each LiteStand. Back
out the T-Knob at each end of the BackDrop Pole
sufficiently to allow pole to fit over the top brass stud of
the LiteStand. Figure 4
7. Raise each LiteStand equally to the height desired.
* Skip step 2 for applications not requiring the background pole
to be inserted into the backdrop.
** Alternately for fabrics with out a sleeve, “A” style clamps can be
used to secure draped fabric to the backdrop pole. You can
find them at most any hardware store.
Figure 5
FirstStudio ® BackDrop Support Kit Instruction Manual • Item#: DP-FSBGSPKT
PHOTOFLEX ® WARRANTY
• Warranties only cover manufacturer’s defects and workmanship
• LiteStands and BackDrop Support pole have a 5 year warranty.
Carry Bag has a 1 year warranty
• We reserve the right to inspect all merchandise returned (end users
and dealers) for warranty fulfillment.
• For returns contact Photoflex first to obtain a return authorization
number and instructions for return.
• Freight must be paid by the customer or dealer.
• Warranties are valid only from date of Original Purchase.
Rev 9/23/13
Customer Support (800) 486-2674
email: [email protected]
Corporate Office (831) 786-1370 • FAX (831) 786-1372
97 Hangar Way, Watsonville, CA 95076
©2013 Photoflex, Inc. ALL RIGHTS RESERVED. FirstStudio ® , LiteStand ® , Photoflex ® and the Photoflex
logo are trademarks or registered trademarks of Photoflex and/or its affiliates in the U.S. and other
countries. Third party trademarks are the property of their respective owners.
Figure 3
Figure 5