Photoflex LP-BA3939FR LitePanel 39 x 39 inch Aluminum Frame - Manual

PROFESSIONAL PHOTOGEAR
Visit photoflex lightingschool .com® for the best free learning resource! For detailed specifications, product tutorial videos and more, please visit www.photoflex ® .com
LitePanel ® Instruction Manual • LitePanel System
LitePanel
The following steps are covered in this instruction:
• Setting up the LiteStand ®
• Assembling the LitePanel frame
• Placing the fabric on the frame
• Available Kits and Accessories
Assembling the LitePanel Frame Figures 1 - 6
1. Place the frame on a flat, clean surface and unfold.
Sections are shock-corded to keep pieces together.
2. Push the black square tubing tightly into the red corners.
3. With the four corners assembled, the frame is ready to
attach the longer straight sides. Fit the longer straight
lengths of tubing into the red couplings.
4. The LitePanel CrossBar is an available accessory to fit the
39 x 39 inch and the 39 x 72 inch LitePanel frame.
Note: Use of the CrossBar is optional. It is designed to aid in
attaching the frame to a LiteStand. The CrossBar is sold separately.
5. Snap the CrossBar into place.
6. Force the T-Clamp of the CrossBar over the frame. Push
to secure in place.
Note: For optimum stability it is recomended that the T-Clamp of
the CrossBar is positioned over the
RED connector as shown in
Figure 5.
Note: There are holes in the T-Clamp of the crossbar to
facilitate bolting for a permanent set up. Photoflex does not in-
clude bolts as overtightening will crack the fixture. For most uses
snapping in place is the best method.
Placing the Fabric on the Frame Figures 7 - 8
7. Attach the fabric by wrapping one corner elastic of the
fabric over one corner of the frame and then work your way
around the frame; attaching the final corner will pull the
fabric tight.
Setting Up the LiteStand Figures 9 - 14
Figure 1 Figure 2
Figure 3 Figure 4
Figure 6
Figure 5
Figure 7 Figure 8 Figure 10 Figure 9