Photoflex LP-SWVLHRDWR LitePanel Hardware - Manual

PROFESSIONAL PHOTOGEAR
Visit photoflex lightingschool .com® for the best free learning resource! For detailed specifications, product tutorial videos and more, please visit www.photoflex.com®
LitePanel ™ Mounting Hardware Instruction Manual • Item: LP-SWVLHRDWR
LitePanel Mounting Hardware
The LitePanel Swivel Mount Hardware is designed to interface
the LitePanel line of frames with the LiteReach Plus
® handheld
extension or the appropriate Photoflex LiteStand ® .
Before assembly check to make sure you have all of the
following parts
• 1ea. Swivel Stand Mount
• 1ea. Upper Cover
• 1ea. Lower track mount
• 2ea. 6mm / .75 x 10mm Socket head screws
• 1ea. 3/16”/5mm allen wrench
Attaching the LitePanel Mounting Hardware to LitePanel
Frames:
Note: You should have the assembled LitePanel frame lying on a
flat surface
Step 1 Disassemble the upper cover from the lower track mount
using the allen wrench.
Figure 1
Note: There are two mounting options for the LitePanel Mounting
Hardware depending on your application:
A. If you are using the hardware with the LiteReach Plus
extension pole then you will only use one LitePanel hardware set.
The orientation of the lower track plate will have the swivel track
in a 90 degree position in relation to the frame tube.
Figure 2
B. If you are using the LitePanel hardware with two light stands
to mount the LitePanel overhead, two LitePanel hardware sets
will be required. The orientation of the lower track plate will have
the swivel track in a parallel position in relation to the frame tube.
Figure 3
Note: For most applications it is recommended that you attach
the hardware in the middle of the width of the frame for the best
balance and stability.
Step 2 Place the track plate under the frame tube, making sure
the swivel track is in the desired position.
Figure 4
Step 3 Place the Top Cover over the frame tube aligning the
holes with the lower Track plate for the attachment screws.
Figure 5
Step 4 Attach the top cover to the lower track plate by securely
tightening both socket screws using the Allen wrench.
Figure 6
Figure 2.
Swivel Stand
Mount
Upper Cover
Lower Track
Mount
Socket Head Screws
Allen Wrench
Figure 1.
Figure 3.
Figure 5. Figure 6.
Figure 4.
Rev 07/10/13