Nipros LS-800 Operating Instruction - Manual (Page 6)

LS-700
06
Optical Fiber Camera Adaptor LS-700
Main panel
Turns on or off the audio limiters for the input signals input to
the AUDIO IN 1/2 connectors.
Indicates the audio level input to the AUDIO IN 1/2 connector.
AUDIO IN LIMITER 1/2 ON/OFF switches
AUDIO IN 1/2 level meter
Indicates the signal status. Each indicator lights up under the following status.
Status indicator
Adjusts the audio input level input to the AUDIO IN 1/2 connectors.
AUDIO IN LEVEL 1/2 volumes
1
2
AUDIO
MONITOR
LEVEL
AUDIO IN
LEVEL
1 2
OFF
ON
ON
AUDIO IN
LIMITER
OFF
OVER OVER
HD-SDI
REMOTE
RET
SYSTEM
TALLY
HEADSET1
HEADSET2
TALLY
1kHz
OFF
ON
1/2
1 2
1 2
AUDIO IN
REF
TC
Indicator Status
TALLY Green tally signal is input to LS-800.
SYSTEM Power is turned on and the system is operating.
HD-SDI 3G/HD/SD-SDI signal is input to the HD-SDI IN 1 connector of LS-700.
RET Return HD-Y or composite video signal is input to LS-800.
TALLY Red tally signal is input to LS-800.
REMOTE Remote controller is connected and the return control system is operating.
REF Reference(GENLOCK) signal is input to LS-800.
TC Time code signal is input to LS-700 from a camera.
Indicator
TALLY
SYSTEM
HD-SDI
RET
TALLY
REMOTE
REF
TC
LS-800 LS-700
Green tally signal
Return
HD-Y or composite
video signal
Red tally signal
Reference signal
(GENLOCK)
3G/HD/SD-SDI signal
Time code signal
Power Power switch ON
OPT
cable
Remote controller to camera
input signal
to LS-800 input signal
to LS-700
input lights up