Nipros LS-800 Operating Instruction - Manual (Page 18)

LS-800
18
Optical Fiber Base Station LS-800
Rear panel
REMOTE connector (8-pin or 10-pin)
Connect to the remote controller.
TALLY IN and OUT connectors (HD D-sub 15-pin)
Input the tally signals from a switcher. And outputs the tally signals to the TALLY IN connector.
For the multi-camera operation, connect the TALLY OUT connector to the TALLY IN connector of the
next base station.
Select the tally channel by the TALLY select switch,1 to 5, on the front panel.
Input a time code signal. And outputs the time code signal from LS-700.
TC IN and TC OUT connectors (BNC)
No. Signal Color
1 RED TALLY 1 BLACK
2 RED TALLY 2 BROWN
3 RED TALLY 3 RED
4 RED TALLY 4 ORANGE
5 RED TALLY 5 YELLOW
6 GREEN
7 BLUE
8 PURPLE
9 GRAY
10 COM(GND) WHITE
11 G REEN TALLY 1 PINK
12 G REEN TALLY 2 LIGHT GREEN
13 G REEN TALLY 3 BLACK/WHITE
14 G REEN TALLY 4 BROWN/WHITE
15 G REEN TALLY 5 RED/WHITE
TALLY IN/OUT Connectors
(HD D-sub 15-pin, female)
Pin Assignment
TALLY
IN OUT
Input the reference(GENLOCK) signal from an external reference signal generator.
REF. IN connector (BNC)