Nipros LS-800 Operating Instruction - Manual (Page 41)

41
The DC power is supplied to a camera via the V-shoe mount (battery adaptor).
2
Power Supply connection
DC power supply to a camera
to LVM-89W
LS­700
OPT connector
IF OUT (6-pin)
DC power
LS­700
OPT connector
Connect the IF OUT connector of LS-700 to the monitor LVM-89W with the 6-pin cable(VC-450).
3 DC power supply to the monitor LVM-89W
DC power
DC OUT 15V(MAX.3A)
connector (XLR 4-pin)
to
prompter,
light,
etc.
6-pin cable (VC-450)
to
camera
V-shoe mount (battery adaptor)
DC power
XLR 4-pin cable
Connect the DC OUT 15V connector of LS-700 to a prompter, a light, etc. with a XLR 4-pin cable.
4 DC power supply to a prompter, a light, etc.
The maximum capacity of the power supply from DS-700, the total of the power from the DC
OUT 15V connector and the power consumption by a camcorder through the V-shoe battery
adaotor, is 75 W.
Optical Fiber Camera Adaptor LS-700/Optical Fiber Base Station LS-800 LS-700/LS-800
IF OUT
RET
HD-SDI
OUT2
HD-SDI
IN2
REF.
OUT
HD-SDI
IN1
RET
HD-SDI
OUT1
LANC
TC
IN
TC
OUT
DC OUT 15V (MAX3A) ▲
OFF
H
L
IF OUT
RET
HD-SDI
OUT2
HD-SDI
IN2
REF.
OUT
HD-SDI
IN1
RET
HD-SDI
OUT1
LANC
TC
IN
TC
OUT
DC OUT 15V (MAX3A) ▲
OFF
H
L