Nipros LS-800 Operating Instruction - Manual (Page 14)

LS-800
14
Optical Fiber Base Station LS-800
Front panel
Selects the audio output level from the CA AUDIO 1/2 connectors, MIC or LINE according to the rated
input level of an external audio equipment..
PGM AUDIO IN 1/2 volume
Adjusts the audio input level input to the PGM AUDIO IN 1/2 connector.
CA AUDIO OUT 1/2 MIC/LINE select switch
Select the CA AUDIO or PGM AUDIO signal to monitor by the MONITOR Headphone.
Select the AUDIO signal to monitor from channel 1 / channel 2 / 1-2 STEREO.
Connect the Headphone with the φ 6.3 plug.
AUDIO MONITOR SELECT Switch
AUDIO MONITOR CA/PGM SELECT Switch
Headphone MONITOR Connector, φ6.3 jack
Turns on or off the limiter for the audio input signal of the PGM AUDIO IN 1/2.
Selects the audio input level input to the PGM AUDIO IN 1/2 connector, MIC or LINE.
PGM AUDIO IN 1/2 LMT switch
PGM AUDIO IN 1/2 MIC/LINE select switch
Adjusts the audio level of a headphone connected to the MONI connector( ).
MONI. VOL (MONITOR VOLUME)
Rated input level Position
- 60dB MIC
+ 4 dB LINE