Nipros LS-800 Operating Instruction - Manual (Page 27)

27
HD-Y/Composite return video signal monitoring connection
Optical Fiber Camera Adaptor LS-700/Optical Fiber Base Station LS-800 LS-700/LS-800
2-3
Using VF Interface Unit VIF-100/BC/P, connect the IF OUT connector of LS-700 to the 6-pin connector of
VIF-100/BC/P with the 6-pin cable (VC-450).
In case of using the viewfinder to display the return signal :
VF
LENS
Camera
VF
LENS
CAM VF
CAM LENS
LENS
VF
RET
IN
( 6-pin cable )
RETURN
signal
IF OUT
RET
HD-SDI
OUT2
HD-SDI
IN2
REF.
OUT
HD-SDI
IN1
RET
HD-SDI
OUT1
LANC
TC
IN
TC
OUT
DC OUT 15V (MAX3A) ▲
OFF
H
L
LS-700
VIF-100/-100BC/-100P
PROTECH
VIF-100
( for SONY ) VIF-100P
( for Panasonic )
Vierfinder Interface Unit(VIF-100, VIF-100BC, VIF-100P, optional) fitting up :
Loosen the screw of the microphone holder and remove the microphone. And hang the Viewfinder
Interface Unit(VIF-100) on the holder and connect with CA, camera, and lens by cables.
PROTECH
VIF-100BC
( for SONY )
PDW-355, PDW-335, etc.
Input composite signal Input HD-Y signal
Input composite or HD-Y signal
according to the camera used
AC IN
100/200V(85-240V)
LANC TALLY
OPT
REF. IN HD/SDI OUT 1
PROMPTER/
IN OUT
VIDEO OUT HD-Y/VIDEO OUT RET1 IN
TC IN
TC OUT
REMOTE
HD/SDI IN1 HD/SDI OUT 2
HD-Y/VIDEO REF.VIDEO IN RET2 IN HD-Y/VIDEO
HD/SDI IN2 RET RET
INTERCOM
1 2 1 2 MADE IN JAPAN
AUDIO IN CA
AUDIO OUT DC IN
12V(12V-18V)
PGM
2W PROD 2W ENG
INTERCOM 4W
LS-800
HD-Y/VIDEO
RET 1 IN or RET 2 IN
from
switcher,
etc.
Composite return video signal
or HD-Y return video signal
Input the composite return video signal
or HD-Y signal according to the camera
connected to LS-700 and VIF-100.
( OPT cable )