BridgeWave AR80 - Manual (Page 37)

AR/GE/FE/U 80/80X Installation Manual
32 580­00519 rev. D
4 Radio Link Status Indicators
During normal operation, the following conditions should exist at the radio, as shown in
Figure 4­1:
· The Power LED should be lit—solid green;
· The 1000Base­X (Fiber) LED should be lit—solid green;
· The Radio Link Up LED should be lit—solid green;
· The Link Quality BER voltage normally should be 3.0­3.3v when it is not raining.
Figure 4­1: LED's indicating power, RF link is up and operational, and fiber connected to
network equipment
The 80GHz system does not require periodic maintenance. However, each end of the link should be
periodically inspected for visible damage or excessive accumulation of dirt on the antenna’s radome.