E-flite Deuces Wild 25e2 ARF - Manual (Page 56)

56 E-flite Deuces Wild Assembly Manual
Wing Installation
Required Parts
Wing panel (right and left) Wing center section
Wing tube (2) 1/4-20 x 2-inch nylon bolt (2)
4-40 x 1-inch socket head bolt (2)
Required Tools and Adhesives
Ball driver: 3/32-inch Flat screwdriver
 1. Slide the wing tube into the socket in the wing
center section.
 2. Slide an outer wing panel onto the wing tube. Guide
the tab with the blind nut into the appropriate slot of the
wing center section. Don't forget to plug the extension
from the center section to the aileron servo.