E-flite Deuces Wild 25e2 ARF - Manual (Page 5)

5 E-flite Deuces Wild Assembly Manual
Note on Lithium Polymer Batteries
Lithium Polymer batteries are significantly more
volatile than alkaline or Ni-Cd/Ni-MH batteries used
in RC applications. All manufacturer’s instructions
and warnings must be followed closely. Mishandling
of Li-Po batteries can result in fire. Always follow the
manufacturer’s instructions when disposing of Lithium
Polymer batteries.
Warning
An RC aircraft is not a toy! If misused, it can cause serious
bodily harm and damage to property. Fly only in open areas,
preferably at AMA (Academy of Model Aeronautics) approved
flying sites, following all instructions included with your radio.
Keep loose items that can get entangled in the propeller away
from the prop, including loose clothing, or other objects such as
pencils and screwdrivers. Especially keep your hands away from
the propeller.
Fuselage Radio Installation
Required Parts
Fuselage Servo w/hardware (3)
Hook and loop tape Receiver
3-inch (76mm) servo extension (3) (4 for optional retracts)
Required Tools and Adhesives
Pin drill Drill bit: 1/16-inch (1.5mm)
Thin CA Phillips screwdriver: #1
Pencil
 1. Install the servo grommets and brass eyelets into your
servos at this time. We feel it is easiest to prepare all the
servos to save time later. If so, you will need all 6 or 7
servos for this step.