E-flite Deuces Wild 25e2 ARF - Manual (Page 52)

52 E-flite Deuces Wild Assembly Manual
 7. Repeat Steps 1 through 6 to install the remaining
motor in the nacelle.
Propeller and Spinner Installation
Required Parts
Propeller (left and right) Spinner w/screw (left and right)
Propeller adapter (2) Wing center section
60-amp speed control (2) Hook and loop tape
Motor nacelle (right and left)
Required Tools and Adhesives
Phillips screwdriver: #1 6-minute epoxy
Paper towels Rubbing alcohol
Canopy glue Mixing cups
Mixing sticks Low-tack tape
Rotary tool w/ high speed cutting bit
Note: Your model is equipped with counter-rotating
spinners. When viewed from the cockpit, the left wing
motor will rotate clockwise and the right wing motor will
rotate counterclockwise. The standard rotation propeller
is installed on the left motor and the pusher propeller is
installed on the right motor.
Wing Right Wing Left