E-flite Deuces Wild 25e2 ARF - Manual (Page 37)

37 E-flite Deuces Wild Assembly Manual
 20. Use silicone adhesive to secure the air tank in the
fuselage. The air line between the air fill fitting and air
tank are connected using a T-fitting. Cut and attach a
3-inch (76mm) piece of air line to the fitting. Attach a
female quick disconnect to the 3-inch line coming from
the T-fitting and the retract air line. Attach a male quick
disconnect to the 3-inch (76mm) line coming from the
T-fitting and air tank air line.
Note: The air tank shown in the photos is not of the
correct size. The correct size air tank is included with
your retract package.
 21. Use a hobby knife and #11 blade to trim the
covering to expose the opening for the main gear retract.
Trim the covering for the wheel well making a 1/8-inch
(3mm) overlap of covering from the inside edge of the
opening so it can be ironed down to add a clean finish
to your model.