E-flite Deuces Wild 25e2 ARF User Manual

Page 18

E-flite Deuces Wild Assembly Manual



6. Attach the servo to the servo mounting blocks

using the screws provided with the servo and a

#1 Phillips screwdriver.



7. Remove the servo horn using a #1 Phillips screwdriver

and trim away any unused arms from the servo horn with

side cutters. Once complete reinstall the servo horn using

a #1 Phillips screwdriver. Use a pin drill and 5/64-inch

(2mm) drill bit to enlarge to outer hole in the remaining

servo arm as shown.



8. Tie the string that has been installed in the outer wing

panel to the servo lead.



9. Use the string to pull the servo lead through the wing

panel as shown.