Metrohm 850 Professional IC Anion MCS Prep 2 - Manual (Page 74)

2.20 Connecting the instrument
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
64 ￭￭￭￭￭￭￭￭
850 Professional IC – Anion – MCS – Prep 2
3 2 1
Figure 36 Connection detector – MCS
1 Detector input capillary 2 Pressure screw, long 6.2744.090
3 MCS output
2.20 Connecting the instrument
2.20.1 Connecting the instrument to the PC
Note
The instrument must be turned off when connecting the PC.
1 Connecting the USB cable
Connect the PC connection socket of the instrument to a USB con-
nector of the computer via the 6.2151.020 USB cable.
2.20.2 Connecting the instrument to mains supply
Warning
The power supply unit must not get wet. Protect it against the direct
effect of liquids.
Mains cable
Which mains cable is supplied depends on the location:
￭ 6.2122.020 with plug SEV 12 (Switzerland, …)
￭ 6.2122.040 with plug CEE(7), VII (Germany, …)
￭ 6.2122.070 with plug NEMA 5-15 (USA, …)