Metrohm 850 Professional IC Anion MCS Prep 2 - Manual (Page 123)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Technical specifications
850 Professional IC – Anion – MCS – Prep 2
￭￭￭￭￭￭￭￭ 113
Cell tempera-
ture 20…50 °C in increments of 5 °C
Temperature
stability < 0.001 °C
Temperature
compensation 0…5 %/K adjustable, default 2.3 %/K
Heating up time < 30 minutes (40 °C)
6.15 Mains connection
Required voltage 100…240 V ± 10 % (auto-sensing)
Required fre-
quency 50…60 Hz ± 3 (auto-sensing)
Power consump-
tion ￭ 65 W for typical analysis application
￭ 25 W standby (detector to 40 °C)
Power supply unit ￭ Up to 300 W maximum, electronically monitored
￭ internal fuse 3.15 A
6.16 Interfaces
USB
Input 1 USB upstream, type B (for connection to the PC)
Output 2 USB downstream, type A
MSB 2 MSB Mini Din 8-pin (female) (for Dosino, stirrer, remote lines, ...)
Caution
When connecting an instrument to the MSB connector you must
switch off the 850 Professional IC.
Detector 2 DSUB-15-pin high density (female)
Column recogni-
tion 3 (including 2 in the column thermostat (see Chapter 2.15, page 47))
Leak sensor 1 jack plug
Further connec-
tions ￭ 1 DSUB 15-pin (female)