9) and mcs (2-10), Injection valve (2-14), The injection valve (2-7) – Metrohm 850 Professional IC Anion MCS Prep 2 User Manual
Page 23
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Installation
850 Professional IC – Anion – MCS – Prep 2
￭￭￭￭￭￭￭￭
13
3
High pressure pump
See Chapter 2.10.
4
Purge valve
See Chapter 2.10.1.
5
Inline filter
See Chapter 2.11.
6
Pulsation damper
See Chapter 2.12.
7
Injection valve
See Chapter 2.14.
8
Separation column
See Chapter 2.22.
When a guard column (see Chapter 2.21,
page 65) is used, it is installed between
injection valve and separation column.
9
10 MCS
11 Detector
12 Eluent output
Connection to the waste container.
13 Sample input
Connection to the sample vessel.
14 Injection valve
For sample preparation. See Chapter 2.14.
15 Sample output
16 Sample degasser
See Chapter 2.13. Use optional.
17 Transfer solution inlet
Connection to transfer solution container.
18 Peristaltic pump
Pumps the transfer solution. See Chapter
2.17.
19 Preconcentration column
For sample preconcentration.
20 Transfer solution outlet
Connection to the waste container.
21 Peristaltic pump
22 Regeneration solution input
Connection to the regeneration solution
bottle.
23 Regeneration solution output
Connection to the waste container.
24 Rinsing solution input
Connection to the rinsing solution bottle.
25 Rinsing solution output
Connection to the waste container.
Standard addition with preconcentration
It is often the case that there are no certified standards available for com-
plicated sample matrices. "Standard addition with preconcentration" tech-
nology can be applied in order to prevent adulterations of the analysis
results caused by the matrix.