Metrohm 850 Professional IC Anion MCS Prep 2 - Manual (Page 51)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Installation
850 Professional IC – Anion – MCS – Prep 2
￭￭￭￭￭￭￭￭ 41
Installing the inline filter
Caution
Observe the flow direction marked on the filter housing for the connec-
tion of the inline filter.
2 3 2 4 1
Figure 21 Connecting inline filter
1 Connection capillary
Connects the purge valve with the inline fil-
ter 2 PEEK pressure screws, short
6.2744.070
3 Inline filter 6.2821.120
Protects against particles. 4 Connection capillary
Connects the inline filter with the pulsation
damper.
1 Screw on the connection capillary running from the purge valve with
a 6.2744.070 pressure screw to the input side of the inline filters.
2 Screw on the connection capillary running to the pulsation damper
with a 6.2744.070 pressure screw to the output side of the inline fil-
ter.
2.12 Pulsation damper
Note
The pulsation damper is already installed in the newly delivered instru-
ment.
Caution
The pulsation damper is maintenance-free and may not be opened.