DJI Ground Station - Manual (Page 44)

©2012-2014 DJI. All Rights Reserved. - 44 -
 Make sure the transmitter and the receiver of the station are powered on.
 Make sure the transmitter and the receiver are matched; do not change the setup of switches on the
radio station.
 Close the Assistant Software to avoid the port confliction.
Instrument Board Failure

The Ground Station launching failure when you click to open the instrument board; the reason is that
your computer can’t support the OpenGL.
Solution:
You may choose the Style2 (shown in Fig.
①, ②) in System SettingOptions before you open the
instrument board.
Ground Station Software Crash

Ground Station Software Crash will not affect the aircraft under mission execution. The aircraft will
keep going on the flight mission edited even the Ground Station Software crash. The Ground Station
Software can be launched again, but loss of the following information will happen: Altitude Offset
value, Aircraft tracks and Way points.
Solution:
Click on the DOWNLOAD button, to retrieve the previously set way points from the DJI Autopilot main
controller.
Launch Flight Failure
 Aircraft doesn’t execute mission after click on GO.
Solution:
 If aircraft is in the air, please ensure it is in Autopilot Mode, and there is no need to set center
Fig②
Fig①