DJI Ground Station - Manual (Page 32)

©2012-2014 DJI. All Rights Reserved. - 32 -
Notices:
Making sure sufficient GPS satellite signal is acquired.
Tips:
Refer to DJI Flight control system User Manual for Manual, Atti., GPS Atti., GPS Cruise switching of your
flight control system, and also the Manual of your R/C Transmitter (Tx).
(V) GO!!
Click Go in the mission Editor, and the aircraft will fly automatically according to the path set in the flight
mission.
Tips:
 Using EDIT to re-edit the mission, while a mission is in process. Please click EDIT in mission Editor
to do so. Then the mission editor will return to the state explained in previous section Flight Mission
Setting

Using PAUSE to pause the mission, while a mission is in process. Please click PAUSE, and the
aircraft will slow down and stay hovering. Click CONTINUE and the aircraft will resume the
un-finished mission.
Mountain Mountain
When you set the waypoints for the aircraft to climb a mountain, please make sure that you leave enough
distance between the aircraft and the mountain, in order to avoid collision caused by aircraft air speed.
La
tit
ud
e
A
lt
it
u
d
e
Longitude
Please note that when you set a waypoint above water such as lake/sea/river, the default altitude the map
shows will be at the bottom of the water body. Please be careful in setting altitude over water.