DJI Ground Station - Manual (Page 39)

©2012-2014 DJI. All Rights Reserved. - 39 -
4.5 Six Pre-Programmed Route Templates
Use one of the six Route templates to generate points automatically.
1. Open the Template Form ToolboxRoute Template, shown as Fig
.①.
2. Click Add Area button to add an area, shown as Fig
.②.
3. Choose the waypoint icon of the chosen area, and drag it to change the area size.
4. Left click mouse to rotate the area, rotation 30
o
per click; click / to adjust the area rotation
angle and rotation 0.1
o
per click, as Fig.
③ shown.
5. Click one Template to generate waypoint(s), for example, choose Scan, as Fig.
④ shown.
6. Click Import to Edit List to do template edit, for example, choose Scan, as Fig.
④ shown.
Tips:
 You can exchange and redo STEP3 and STEP4, until get an area needed.
 Dragging the waypoint icon also can move the area, and the chosen icon shows green.
 More than one area can be added; operation will effect on every chosen area, if more than one area
is chosen.
 Left click mouse to choose or not choose an area, green area is chosen, and red is not.
 You need to choose the area if you want to delete it by click Delete Area.
 Click Scan button once or twice, the route waypoints will be assigned vertically or horizontally
 Mouse on Param shows parameter meaning, row numbers for Scan and points for others.
 You can set sea level at Alti, and ensure that the altitude is higher than the aircraft altitude.
 Edit waypoints after clicking Import to Edit List button
 5 Waypoints station will not enable Scan mode.
Fig.④ Fig.⑤ Fig.③
Fig.② Fig.③