Brandmotion 1008-6502 - Manual (Page 6)

INSTALLATION INSTRUCTIONS
6501 and 6502 Instructions 6-13-12.doc 6 of 20
Section 3: Chassis Harness Installation continued
19. Route the exterior portion of the supplied
chassis harness along existing vehicle
chassis harness and over fuel tank. Using
supplied tie wraps, secure the harness to
existing wiring at 2 inch intervals (Figures
18 and 19).
Figure 18
Figure 19
20. Loop any excess from the harness as shown
and secure with tie wraps (Figure 20).
Figure 20
21. Plug the chassis harness into the camera
harness installed earlier under the pickup
bed (Figure 21).
Figure 21