Brandmotion 1008-6502 - Manual (Page 4)

INSTALLATION INSTRUCTIONS
6501 and 6502 Instructions 6-13-12.doc 4 of 20
Section 3: Chassis Harness Installation
11. Remove the driver side sill plate with a trim
tool (Figure 10).
Figure 10
12. Loosen driver side A-pillar molding with
hands and then remove the driver side
lower kick panel (Figure 11).
Figure 11
13. Pull back carpet in front of driver’s seat.
(Figure 12).
Figure 12
14. Secure Super Duty template number 1008-
9100-01 (Figure 13) or secure F150
template number 1008-9100-02 over
opening in front of driver’s seat (Figure 14).
Figure 13
Figure 14