Brandmotion 9002-8837 - Manual (Page 6)

INSTALLATION
INSTRUCTIONS
8837 Instructions 10-7-14.docx Page 6 of 6
Step 35: Test the system. Start vehicle and shift into
Reverse in order to check that all connections were
made properly. If all of the connections are correct you
will see the camera image displayed on the factory
display screen.
To enable or disable the camera input,
select from among rear vision options in radio settings.
Step 36: Reassemble vehicle. Follow your disassembly
steps in reverse order, taking care not to bind the
harness wiring when reinstalling trim.