Logging, Smoothing, Setup – Bird Technologies 5000-XT-Manual User Manual
Page 49: Tstpm sensor attached, Tps calibration standard power interface, Logging smoothing setup

35
Logging
See “Log Files” on page 36.
Smoothing
See “Smoothing Menu” on page 36.
Setup
TSTPM Sensor Attached
TPS Calibration Standard Power Interface
Note: The main measurement is in the larger display located above
the graph bar. The two smaller, secondary measurements are located
below the graph bar. All of these measurements vary depending on
the main measurement displayed.
Key Button
Action
Right Arrow
No effect
Left Arrow
No effect
Up Arrow
Switch True Avg (W, uW, mW, kW, dBm)
Down Arrow
Switch True Avg (W, uW, mW, kW, dBm)
Ok Button
Selects language and change all screens to reflect
the language selected
Menu Button
Goes to Main Menu
Log Button
Goes to Logging submenu
OK (2 Sec)
Initiates Shutdown. See “Shutting Down” on
page 13
. (2 Sec)
Performs a screen shot. See “Performing a Screen
Shot” on page 13
0 (2 Sec)
Zero/Cal Unit/Sensor
8 (2 Sec)
Turn On/Off Smoothing
Menu & Log (2 sec)
Language Selection Screen