Bird Technologies 5000-XT-Manual - Manual (Page 36)

22
Crest Factor Interface
* - Crest Factor is the ratio of the forward peak power and the forward
Average power. It is measured in dB.
Note: The main measurement is in the larger display located
above the graph bar. The two smaller, secondary measurements
are located below the graph bar. All of these measurements vary
depending on the main measurement displayed.
Key Button Action
Right Arrow Changes the Main Measurement to CCDF
Left Arrow Changes the Main Measurement to Forward Burst
Up Arrow Switch Fwd Ave (W, uW, mW, kW, dBm)
Down Arrow Switch Rfl Ave (W, uW, mW, kW, dBm)
OK Button Initiates Shutdown. See “Shutting Down” on
page 13
Menu Button Goes to Main Menu
Log Button Goes to Logging submenu
+/- Toggles between “Small” and “Large” Display
. (2 Sec) Performs a screen shot. See “Performing a Screen
Shot” on page 13
0 (2 Sec) Zero/Cal Unit/Sensor
8 (2 Sec) Turn On/Off Smoothing (*for Fwd Avg)
Menu & Log (2 sec) Language Selection Screen
Small Display
Large Display